Loop Powered Isolator/Repeater
The Adtech Model SCX 102 Loop Powered Isolator/Repeater provides a solution for ground loops and problems encountered in connecting together recorders, process control systems and computers.
The SCX 102 accepts a 4-20 mA signal and provides an isolated 4-20 mA output. Operating power is derived from the input signal so no external power source is required.
DIN mounting is supplied as standard. Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).
Data Sheet (PDF)
Instruction Manual (PDF)
|
ECONOMY Isolated Signal Converter DC Powered
The Adtech Model ECT 302 DC Powered Isolated Signal Converter provides a user configurable solution for ground loops and problems encountered in connecting together recorders, process control systems, computers, DCS and PLC systems.
Another common application is to provide additional amplification or drive to a process signal loop.
The ECT 302 accepts a DC current/voltage unipolar input and converts it to a DC current/voltage unipolar process signal output. Most inputs and outputs are jumper configurable.
DIN mounting is supplied as standard. Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).
Data Sheet (PDF)
Instruction Manual (PDF)
|
ECONOMY Bipolar 3-Way Isolated Signal Converter DC
The Adtech Model ECT-302-1 DC Powered 3-Way Isolated Bipolar Signal Converter provides a user configurable solution for ground loops and problems encountered in connecting together recorders, process control systems, motor control systems, computers, DCS and PLC systems.
The ECT-302-1 accepts a standard process input signal and converts it to a 0-10 VDC or 0-± 10 VDC output.
The standard response time is 150 milliseconds. Higher speed of response is available (please consult factory).
DIN mounting is supplied as standard. Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).
Data Sheet (PDF)
Instruction Manual (PDF)
|
ECONOMY 3-Way Isolated Signal Converter DC Powered
The Adtech Model ECT-302-3 DC Powered 3-Way Isolated Signal Converter provides a user configurable solution for ground loops and problems encountered in connecting together recorders, process control systems, computers, DCS and PLC systems.
The ECT-302-3 accepts a standard process input signal and converts it to either a true current source process signal of 4-20 mA or 1-5 VDC output signal.
The input, output and power supply are mutually isolated to 600 VAC or 1,000 VDC peak minimum.
DIN mounting is supplied as standard. Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).
Data Sheet (PDF)
Instruction Manual (PDF)
|
Isolated Signal Converter
The Adtech Model SCT 02 Isolated Signal Converter provides an accurate and economical signal impedance conversion from a current or voltage source to a standard process current or voltage signal output with a maximum of 10 mV P/P output ripple.
It is highly useful for applications that require signal isolation to eliminate ground loops, instrumentation level shifts, or conditioning of a process signal riding over common mode AC or DC voltages. Another common application is to provide additional amplification or drive to a process signal loop.
Recalibration to other ranges is accomplished easily.
Data Sheet (PDF)
Instruction Manual (PDF)
|
Dual Output Isolated Signal Converter
The Adtech Model SCT 02/O66 AC Powered Dual Output Isolated Signal Converter provides a user configurable solution for ground loops and problems encountered in connecting together recorders, process control systems, computers, DCS and PLC systems.
The SCT 02/O66 provides two (2) isolated 4-20 mA or 1-5 VDC outputs; or (1) of each with a maximum of 10 mV P/P output ripple.
It is highly useful for applications that require signal isolation to eliminate ground loops, instrumentation level shifts, or conditioning of a process signal riding over common mode AC or DC voltages. Another common application is to provide additional amplification or drive to a process signal loop.
Data Sheet (PDF)
Instruction Manual (PDF)
|
300 Series Isolated Three-Wire Signal Converter
The Adtech Model SCT 302 Isolated Three-Wire Signal Converter is one in a family of the 300 Series Transmitters that provide field mounted efficiency and ease of wiring in a compact DIN package.
The SCT 302 accepts a standard process signal and provides a standard process signal output for interfacing directly with PLC's, DCS's and process computers.
Most 300 Series units provide independent linearity equivalent to 14-bit digital accuracy and include user friendly features such as wide ranging and noninteractive zero and span controls.
The power range is 15 to 42 VDC @ 28 mA typical.
Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).
Data Sheet (PDF)
Instruction Manual (PDF)
|
300L Low Power Isolated Three-Wire Signal Converter
The Adtech Model SCT 302L Low Power Isolated Three-Wire Signal Converter is one in a family of the Adtech 300L Series Low Power Transmitters that provide field mounted efficiency and ease of wiring in a compact DIN package.
The SCT 302L accepts a standard process signal input and converts it to a 1-5 VDC or 0-5 VDC output for interfacing directly with PLC's, DCS's and process computers.
Remote monitoring of oil/gas pipelines, water/waste-water facilities and utility substations are a few typical applications.
Most 300L Series units provide independent linearity equivalent to 14-bit digital accuracy and include features such as wide ranging and noninteractive zero and span controls.
The power range of 7 to 42 VDC; 3.5 mA typical provides low power consumption
Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).
Data Sheet (PDF)
Instruction Manual (PDF)
|
Isolated Signal Converter - AC Powered
The Adtech Model SCT 502 AC powered Isolated Signal Converter comes in a compact DIN package providing mounting efficiency, ease of wiring and a user configurable solution for ground loops and problems encountered in connecting together recorders, process control systems, computers, DCS and PLC systems.
The SCT 502 accepts a standard process signal input and converts it to a standard process current or voltage signal output with a maximum of 10 mV P/P output ripple. Most are jumper configurable.
Surface mount (Option H28) is available at no extra cost (specify).
Data Sheet (PDF)
Instruction Manual (PDF)
|
Isolated Bipolar Signal Converter AC Powered
The Adtech Model SCT-502-1 AC Powered Isolated Bipolar Signal Converter provides a user configurable solution for ground loops and problems encountered in connecting together recorders, process control systems, motor control systems, computers, DCS and PLC systems.
The SCT-502-1 accepts a 4-20 mA, 0-10 VDC or 0 to +/- 10 VDC and provides a 0-10 VDC or 0 to +/- 10 VDC output with a maximum of 10 mV P/P output ripple.
Recalibration in the field is easy and convenient.
Surface mount (Option H28) is available at no extra cost (specify).
Data Sheet (PDF)
Instruction Manual (PDF)
|
Isolated Two-Wire Signal Converter
The Adtech Model SCX 202 Isolated Two Wire Signal Converter is one in a family of the 200 Series Transmitters that provide field mounted efficiency and ease of wiring in a compact DIN package.
The SCX 202 accepts a standard process signal to provide a standard 4-20 mA two-wire loop output for interfacing directly with PLC's, DCS's and process computers.
Most 200 Series units provide independent linearity equivalent to 14-bit digital accuracy and include user friendly features such as wide ranging and noninteractive zero and span controls.
The power range of 8 to 42 VDC provides valuable added drive capability.
Surface mount (Option H26) or snap track mount (Option H25) are available at no extra cost (specify).
Data Sheet (PDF)
Instruction Manual (PDF)
The model 10 is an input loop powered Isolator. It takes any mADC signal from 4 to 50 mADC and provides a corresponding isolated mADC signal on the output. The model 10 derives it's power from the input mADC loop. The chart on the data sheet details the available ohm drive capability dependent upon the loop voltage available and the current being isolated. It requires no other source of power.
More information on Model 10 Loop Isolator
Visit Pyragon, Inc.
Data Sheet (PDF)
Instruction Manual (PDF)
The 2513T (VDC output) and 2533T (mADC output) are 3 wire output loop powered isolators that share a common negative between the power and output circuit. The input is isolated from the output/power circuits. The output on this isolator can go to either zero volts or zero ohms.
More information on Model 2513T/2533T 3 Wire Isolator
Visit Pyragon, Inc.
Data Sheet (PDF)
Model 2532T 2 Wire Isolator
The model 2532T is a 2 wire 4-20 mADC output loop powered isolator. This isolator derives it's power from the output loop in the same manner that a DP transmitter works. The input is isolated from the output.
More information on Model 2532T 2 Wire Isolator
Visit Pyragon, Inc.
Data Sheet (PDF)
Instruction Manual (PDF)
|