ACA-140

100 Series AC Current/Voltage Single Alarm

The Adtech Model ACA 140 AC Current/Voltage Single Alarm accepts a standard AC current/voltage input signal and provides one (1) DPDT relay contact output setpoint rated at 10 amps; 30 VDC or 250 VAC resistive.

An exclusive feature is that the input can be configured to accept either an "average" input (standard) or true rms input response (specify).

Integral dual color LEDs provide green indication for normal conditions and red indication on alarm setpoint independent of relay coil power.

ACA-142

100 Series DC Current/Voltage Dual Alarm

The Adtech Model ACA 142 AC Current/Voltage Dual Alarm accepts a standard AC current/voltage input signal and provides two (2) SPDT relay contact output setpoints rated at 10 amps; 30 VDC, or 250 VAC resistive.

An exclusive feature is that the input can be configured to accept either an "average" input (standard) or true rms input response (specify).

Integral dual color LEDs provide green indication for normal conditions and red indication on alarm setpoint independent of relay coil power.

DCA-114

100 Series DC/Current Single Alarm

The Adtech Model DCA 114 100 Series DC/Current Single Alarm accepts a standard process DC current/voltage input signal and provides a DPDT relay contact output setpoint rated at 10 amps; 30 VDC or 250 VAC resistive.

A 24 VDC at 35 mA output is provided as standard for powering a loop transmitter.

Integral dual color LEDs provide green indication for normal conditions and red indication on alarm setpoint independent of relay coil.

DCA-115

100 Series DC/Current Dual Alarm

The Adtech Model DCA 115 100 Series DC/Current Dual Alarm accepts a standard process DC current/voltage input signal and provides two SPDT relay contact output setpoints rated at 10 amps; 30 VDC, or 250 VAC resistive.

A 24 VDC at 35 mA output is provided as standard for powering a loop transmitter.

Integral dual color LEDs provide green indication for normal conditions and red indication on alarm setpoint independent of relay coil power.

DVA-112

100 Series Deviation Alarm

The Adtech Model DVA 112 100 Series Deviation Alarm accepts two standard process DC current/voltage signals and provides relay contact outputs

The DVA 112 accepts two similarly scaled inputs and provides two alarm outputs. Both alarms share the same setpoint adjustment but have different dead band adjustments.

The DVA 112 has a SPDT output per each setpoint rated at 10 amps; 30 VDC, or 250 VAC resistive. An optional DPDT output per setpoint is available when specifying option O49.

A 24 VDC at 35 mA output is provided as standard for powering a loop transmitter.

Integral dual color LEDs provide green indication for normal conditions and red indication on alarm setpoint independent of relay coil power.

ADM-20

Amplitude Discriminator Module

The Adtech Model ADM 20 Amplitude Discriminator/High-Low Selector Module provides a single output that represents either the highest or lowest of 2,3, or 4 input signals. It utilizes precision comparator networks to provide a bumpless transition from signal to signal. Selection of high or low select operation is achieved by a single jumper selection. A Three input median signal selector is available when specifying option I27.

The ADM 20 delivers standard process current or voltage signals on the output with a maximum of 10 mV P/P output ripple.

Recalibration to other desired ranges is accomplished easily.

AIM-37

Analog Integrator Module

The Adtech Model AIM 37 Analog Integration Module computes the analog integral of the input variable over periods of up to 2 hours.

In the AIM 37, the analog integrator provides a standard process voltage or current output proportional to the integrated input over a selected time period. Effectively, it averages the input over a preset period and updates the output after each period.

The integration time may be internally preset or controlled by an external reset contact.

FSM-55

Frequency Scaling Module

The Adtech Model FSM 55 Frequency Scaling Module converts or scales the pulse rate output of a wide variety of prime flow sensors to convenient engineering units for display on a totalizing counter. It can be used for such applications as turbine meters, positive displacement meters or speed measurements by magnetic pick-ups.

The FSM 55 solves scaling problems economically and accurately.

Two decades of scaling are standard. Four and six decades are optionally available when specifying options I 34 and I 35 respectively.

GCM-36

Gap Controller Module

The Adtech Model GCM 36 Gap Controller Module is used to stop oscillation in feedback control loops to reduce mechanical wearout of actuators.

Use of the GCM 36 can prevent actuator "hunting" in such applications as damper controls, combustion processes and extrusion pressure control.

The GCM 36 accepts all standard current and voltage process signal inputs.

MFM-32

Mass Flow Module

The Adtech Model MFM 32 Mass Flow Module consists of a single module that will provide both temperature and static pressure correction of a differential pressure measurement taken across an orifice plate. The inputs accept standard process currents and voltages. See the Product Data Bulletin for specific computation information.

An exclusive output option (O44) provides a pulse rate output along with the standard analog output.

ADB-51

Analog Divider Module

The Adtech Model ADB 51 Analog Divider Module offers an accurate and economical means of accepting two process inputs and dividing one by the other. It provides a standard process current or voltage signal output with a maximum of 10 mV P/P output ripple representing the computation.

The ADB 51 offers a convenient way of interfacing signals to a computer system or other process instrumentation for improved resolution.

Specifying option O44 provides a pulse rate output along with the standard analog output.

Recalibration to other desired ranges is accomplished easily.

ALM-00

Analog Linearizer Module

The Adtech Model ALM 00 Analog Linearizer Module offers an accurate and economical means of converting whole or fractional power functions into linear outputs such as linear flow outputs from flumes and weirs. It provides standard process current or voltage signals on the output with a maximum of 10 mV P/P output ripple.

The standard model handles monotonic functions such as root extraction and power functions.

ALM-00-O42

Analog Linearizer Module with 10 Segment Linearizer

The Adtech Model ALM-00-042 Analog Linearizer Module offers an accurate and economical means of converting whole or fractional power functions into linear outputs such as linear flow outputs from flumes and weirs. It provides a standard process current or voltage signal output with a maximum of 10 mV P/P output ripple.

10-segment breakpoint linearizer, Option O42, provides easy calibration with each segment allowing an increase or decrease of slope with the center position of the potentiometer providing a gain of one.

ALM-00-O43

Analog Linearizer Module - Log/Linear

The Adtech Model ALM-00-O43 Analog Linearizer Module offers an accurate and economical means of converting whole or fractional power functions into linear outputs such as linear flow outputs from flumes and weirs. It provides a standard process current or voltage signal output with a maximum of 10 mV P/P output ripple.

Option O43 provides logarithmic functions on a continuous calculation method and the output may be the log of input or antilog of input.

ASM-54

Adder Subtractor Module

The Adtech Model ASM 54 Adder Subtractor Module provides an accurate and economical means of adding and/or subtracting up to four process signal inputs to provide a standard process current or voltage signal output with a maximum of 10 mV P/P output ripple that represents the sum and/or difference of the inputs.

An exclusive feature eliminates the need to change any internal components or wiring when converting any of the four inputs from an adding or subtracting mode.

The ASM offers a convenient way of interfacing the sum or difference of signals to a computer system or other process instrumentation.

AXB-53

Analog Multiplier Module

The Adtech Model AXB 53 Analog Multiplier Module provides an accurate and economical means of accepting two process inputs and multiplying one by the other. It provides a standard process current or voltage signal output with a maximum of 10 mV P/P output ripple that represents the computation.

The AXB 53 offers an easy and practical way of interfacing process signals to a computer system or other instrumentation for improved resolution.

Recalibration to other desired ranges is accomplished easily

LLM-64

Lead/Lag Module

The Adtech Model LLM 64 Lead/Lag Module offers an accurate and economical means of producing a phase lead or phase lag between an input current or voltage signal and provides a standard process current or voltage signal output with a maximum of 10 mV P/P output ripple. It utilizes precise digital techniques to do this function.

Recalibration to other desired ranges is accomplished easily.

MDB-52

Analog Multiplier/Divider Module

The Adtech Model MDB 52 Analog Multiplier/Divider Module accepts up to three (3) process signal inputs and performs one of the following computations: multiply/divide, multiply, divide, square root and the square root of ratio or product. (Refer to the "Basic Equations" section on the Product Data Bulletin.)

An exclusive output option (O44) provides a pulse rate output along with the standard analog output.

The MDB 52 provides standard process current or voltage signals on the output with a maximum of 10 mV P/P output ripple.

Recalibration to other desired ranges is accomplished easily.

ARB-96

Adjustable Ramp Buffer

The Adtech Model ARB 96 Adjustable Ramp Buffer provides an accurate and economical means of limiting/controlling the rate of change of an input process signal such as 4-20 mA .

The ARB 96 provides standard process current or voltage signals on the output with a maximum of 10 mV P/P output ripple.

LIT-56

Electronic Integrator/Totalizer

The Adtech Model LIT 56 Electronic Integrator/Totalizer converts linear analog inputs into a variable pulse rate output proportional to the input.

The unit handles all standard process voltage and current inputs and provides a 24 VDC pulse output capable of driving most electromechanical counters. A relay contact output can be provided when specifying Option O17. An optional voltage pulse output is also available for electronic counters.

Zero, rate, and drop-out controls are provided by infinite resolution multiturn potentiometers. Recalibration to other ranges is convenient via simple strap selection of output ranges and the adjustable drop-out feature.

Recalibration to other desired ranges is accomplished easily.

ACT-40

Four Wire AC Isolated Transmitter

The Adtech Model ACT 40 AC Current/Voltage Transmitter delivers a highly accurate isolated conversion of a standard AC signal to a standard process current or voltage signal output with a maximum of 10 mV P/P output ripple.

This provides a utility class instrument for the industrial and process customer.

The most common AC current application is to measure the line current of an induction motor as a measure of the power being delivered to the load.

Recalibration to other desired ranges is accomplished easily.

MPF-650

Isolated Frequency to DC Transmitter

The Adtech Model MPF 650 Isolated Frequency to DC Transmitter converts absolute frequency or deviation of frequency into a linear DC signal such as 4-20 mA. It accepts a periodic waveform from a variety of primary sensors such as turbine meters, positive displacement meter contacts or a magnetic pickup and computes absolute frequency.

The MPF 650 has measurement techniques that produce essentially no ripple (less than 0.02% of range maximum), which eliminates aliasing problems.

The MPF 650 provides +12 VDC at 35 mA to power the sensor when specifying option O65. The use of this option will, however, negate the input to output isolation.

The output is a true current/voltage source.